| |
Repsol Laminox 1197
Translation of the original Spanish. In case of a discrepancy,the Spanish original prevails
Description and Recommendations
A very light fluid with a high refining level and specially selected additives. Its main application is the cold lamination of low-alloy ferritic and austenitic stainless steels. There is a concentrated version of this product called Repsol Laminox 1197 C. For further information, contact our Technical Department.
Properties
Low viscosity that provides steel with a glossy finish. Its fluidity and wetting ability helps the formation of a transfer layer, reducing use as less fluid sticks to the strip and less is retained in diatomaceous soil as it is filtered.Provides perfect lubrication for rollers, so that the film in the roller-strip area is not broken and a lot of heat production due to rubbing is prevented.Reduces the risk of stains during annealing. Helps oil removal if required.
Technical characteristics
|
UNITS |
METHOD |
VALUE |
Appearance |
|
|
Glossy and transparent |
Colour |
|
ASTM D 1500 |
1 |
Density at 15oC |
g/ml |
ASTM D 4052 |
0,850 |
Viscosity at 40oC |
cSt |
ASTM D 445 |
10 |
Viscosity at 100oC |
cSt |
ASTM D 445 |
2,65 |
Flammability V/A |
oC |
ASTM D 92 |
175 |
Pour point |
oC |
ASTM D 97 |
-30 |
Saponification rate |
mg KOH/g |
|
4,5 |
Noack volatility, 1hr at 150oC |
|
DIN 51581 |
2,5 |
Cu corrosion, 3hr at 100oC |
|
ASTM D 130 |
1b |
EP properties, 4 ball machine |
|
ASTM D 2783 |
|
Last load without seizing up |
Kgf |
|
40 |
Soldering load |
Kgf |
|
126 |
Load/wear index |
|
|
17,1 |
Indentation diameter at 40 Kgf |
mm |
ASTM D 4172 |
0,49 |
Overview
Bulk and 185 kg cans, only for Laminox 1197 C.
Hazard identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Minimum precautions should be taken to avoid prolonged contact with the skin. The use of gloves, visors or glasses is recommended to avoid splashes.
Health and safety risks.
Inhalation: As this product has low volatility, the risk of inhalation is minimal.Ingestion: Do not make an affected person vomit. Supply water. Get medical help. Contact with the skin: Wash thoroughly with soap and water.Eyes: Wash thoroughly with water.General measures: Get medical help.
Fire-fighting measures
No special measures required.Extinction: Foams, dry chemicals, CO2, water spray. Do not apply a jet of water directly, as it could spread the product.
Environmental precautions
Danger of physical pollution if spilt (water, coastlines, soil, etc.) due to its floatability and oily consistency that may harm flora and fauna on contact. Prevent the material from entering the water supply. Decontamination and cleaning: Treat as an accidental oil spillage. Avoid dispersion using mechanical barriers and remove with physical or chemical elements. |
|
